Technical features
Insulation
 D-value: 0.028 W/mK
Density: 30 kg/m³ (±2)
Compressive strength
120 kPa (min) 170 kPa (typical)Performance under the influence of an equally distributed load: Class C Deformation under the influence of a load: 40 kPa, at 70°C during 168 hours ≤ 5%
Moisture vapour resistance
15 MNs/g (board only), 40 MNs/g (installed value - bedded in bitumen)
CFC/HCFC content
0%
Facing
Mineral coated and perforated glass fleece of approx. 150g/m²
Coefficient of thermal expansion
0.05 mm/mK
Specific heat capacity
1.4 kJ/kgK
Long term water absorption
< 2% (BS EN 12087)
Tensile strength perpendicular to surface
Min. 80 kPa
Fire reaction
Euroclass E (BS EN 13501-1) Euroclass B s2 d0 (end use on metal deck)
Dimensional stability
48 hours humidity test:
70°C. 90% RH (EN 1604)
change in length: ≤ 2%
change in width: ≤ 2%
change in thickness: ≤ 6%
|
Dimensions
slope 1:60 |
1200 x 600mm |
60 A |
|
60 B |
|
60 C |
|
60 D |
|
Edge detail
Square edge
Applications
Flat roof insulation for use under built-up bituminous felts, single-ply membrane (adhered and mechanically fixed) and mastic asphalt waterproofing systems
Remarks
Dry system: no introduction of moisture between existing and new roofing
The additional imposed load is reduced to a minimum
Certificates
-
ATG 2262
ATG/H 750
-
CEN KEYMARK  001-BK-514-0004-0019-W002
Standards
Manufactured to BS EN 13165
The production of the boards is certified to ISO 9001:2000
Health & Safety Data
Click here to download the Health & Safety Data Sheet. |
